5522231048
Finalized Box Parts
...
Printing V2
2025-07-29 22:36:18 -04:00
a8eff8370c
Tube pass Support and cleanup
...
Added support for tube pass.
Small cleanup of ear placement for edges.
2025-07-23 14:35:02 -04:00
e28fac97d1
Fix Edge Joiner Clear
...
Up Joiner clear had wrong orientation.
Set edge Y Magnet depth.
2025-07-22 12:25:34 -04:00
01194bd206
Fix Joiners and Adjust Magnets
...
Joiner clear had test code that needed to be removed.
Magnets actually 1.79mm not 2mm holes were oversized.
2025-07-22 10:05:45 -04:00
56dd7f504d
Added Magnets
...
- Bottm Edge to hold hinged lid
- Added Magnet SVG to front face
- Added door magnet pockets.
- Known Issue: Edge connectors have been broken!
2025-07-22 09:13:36 -04:00
52f53fe074
Mounts Rear and Grid
...
Lengthen Rear Mount and polish.
Finish Grid mount, test fit in slicer looks good.
2025-07-10 13:43:46 -04:00
24e2bdd688
Added Rear Mount
...
Rear Mount added.
Offset bottom back edge inserts
2025-07-10 07:18:46 -04:00
99bc9e5dda
Major Update
...
Foot: Added lock to prevent falls
Door: Removed Inserts from behind
Added Cutout behind hinge
Rear: Removed 6th tube
Edges: Added ability to offset window
inserts
Added hinge cutout
Reworked joiners to not need seperate part
2025-07-08 10:27:58 -04:00
f2d2fdf404
Add ears for edge_front_bottom
2024-12-29 21:02:42 -05:00
978a0a469a
Setup edge_top_front
...
edge_top_front print setup.
hinge extended to not need changes in top_front edge
2024-04-09 08:53:29 -04:00
b9cc75f048
Moved Hinge code up
...
Moved Hinge code up to better organize modules.
Added backwards rotation to stationary hinge parts.
2024-04-08 09:13:17 -04:00
764b87462e
Adjusted Hinge Knuckles
...
shrunk and connected to plates.
Knuckle connections need face alignment
2024-04-08 01:02:39 -04:00
903fe18ff1
hinger tighter
...
tightened hinger, and added chamfer
2024-04-07 23:17:50 -04:00
39d65ae1a6
Hinge tweak
2024-04-07 18:32:37 -04:00
2fcac3895b
remove dead code
2024-04-07 17:52:29 -04:00
8e063e2cca
Removed dead code
2024-04-07 17:17:55 -04:00
b8bfd1841b
Hinge door plate work
...
setup inserts and correct hinge motion.
2024-04-07 15:42:24 -04:00
be844ad17e
Removed debug echos
2024-04-07 14:06:30 -04:00
8cf42bafce
Fix compile warnings in Edge & adjust top back for print
...
Adjusted top-back edge for printing with fdm ears. Perfect print.
Added logic to not error when tn=1 to remove compile errors.
2024-04-07 13:51:55 -04:00
b9eacf4bb9
Work on hinge
2024-04-03 19:14:50 -04:00
14f7e84755
Added mouse ears; back bottom renders in print orientation
2024-03-24 10:39:50 -04:00
b17cc6e468
Added Edge part definitions and edge center mount.
2024-03-22 19:06:10 -04:00
d0fa3bbfa8
Bottom Edge fix
...
Fixed bottom edge to use floor type.
Added colors for edge joiner clearance cuts. brown is down. green is up.
2024-03-22 15:14:19 -04:00
f6d2ce3f9e
Adjusted box and corner size
...
Corner size was calculated too large. Box should be correctly sized now.
Feet should be Repbox compatible.
2024-03-22 12:17:54 -04:00
7622d2e7d1
added modes and inserts
...
Added initeq m3 insert holes
new modes edge_side_foot edge_test
side foot not yet integrated into edge
2024-03-21 16:19:43 -04:00
824ddfdcb3
Inset Tube connectors and added hinge mount holes
...
Added hinge mount holes, m3 insert.
Inset tube connectors flush with face.
Added Foot for Compatibility with the Repbox drybox mount
2024-03-21 00:11:37 -04:00
db44517612
Added Full Box
...
Full Box model does a mockup of all parts.
Fixed alignments
2024-03-19 21:32:27 -04:00
e521b83a3f
Cleanup
...
cleanup of a couple of variables
2024-03-19 00:10:58 -04:00
ea87154e2c
Updated distance
2024-03-18 19:51:32 -04:00
f89a5761ad
Added PCM10
...
Added PCM10 option to Edge.
2024-03-18 19:10:08 -04:00
d8402f29ba
Cleanup Push
2024-03-18 18:02:05 -04:00
dda02b2aea
Reimplementation of beam
...
Beam and Corner working, needs tweaks.
TODO: Cleanup new size. fix trim size..too big.
2024-03-17 11:03:14 -04:00
