b9f2c84e92
Fixed json config
...
JSON config was for 2 primaries
2026-03-18 17:35:44 -04:00
cee9756dd7
Bobbin Update
...
Broke out parameters and defined primary/secondary as json
presets.
2026-03-18 15:38:59 -04:00
bf286545ab
Fix YokeHeight Variable
...
Fixed YokeHeight Variable
Also broke out wire channel diameter.
2026-03-18 15:24:59 -04:00
939d87e97d
Remove Duplicate Code
...
bobbin.scad had code from core.
2026-03-18 13:50:56 -04:00
88e7c07dd8
Added final Vout print
2023-12-31 20:22:30 -05:00
44a2c41d10
Updated Mean Path Calc
2023-12-29 09:17:20 -05:00
264f0dedfe
Added potting volume calculation
2023-12-28 17:52:01 -05:00
ff02bd28cc
Added CW
2023-12-28 12:51:55 -05:00
23222c446d
Reduced render resolution
2023-12-28 12:51:05 -05:00
904103f2f8
Update to M3
2023-12-28 11:18:05 -05:00
a8bc5b04b6
Turns Ratio and Space for Transformer
...
Moved transformer out and up a bit, made connection more stable.
Updated turns ratio to 100:1 to match new primary.
2023-12-28 11:17:23 -05:00
a46f483bcb
Terminal with 3 posts
2023-12-15 23:43:22 -05:00
58870c3973
Fixed Bobbin error
...
chars deleted re-added
2023-12-05 20:32:48 -05:00
7a5175fc35
Fixed Warning
...
Got a warning, had an extra l param on the joiner _clear
2023-12-05 16:04:47 -05:00
4c77428715
Moved Transformer Mount; Added Design info
...
Added Design info and notes. Calculate voltages from parameters.
Still need frequency calcs.
Moved transformer mount away from board and up 2mm. This should add clearance
but still could use stability. Should move to full joiners.
2023-12-05 16:04:05 -05:00
846efa74da
First TestBed
...
Working prototype. Still needs full case, fan and current limiter.
2023-12-02 14:24:14 -05:00
ad72818ad7
Cleanup of core
...
Setup Alignment/orientation.
2023-11-27 16:12:35 -05:00
ac552cac33
Initial Import V1 bobbins
2023-11-27 13:54:23 -05:00
