diff --git a/lovejoy.scad b/lovejoy.scad
index 30fb809..a04b23c 100644
--- a/lovejoy.scad
+++ b/lovejoy.scad
@@ -2,17 +2,27 @@ use <PolyGear/PolyGear.scad>
 use <PolyGear/PolyGearBasics.scad>
 use <PolyGear/shortcuts.scad>
 
+render_fn = 180;
+render_fa = .5;
+render_fs = .2;
+
+$fn= ($preview) ? 30 : render_fn;
+$fa= ($preview) ? $fa : render_fa;
+$fs= ($preview) ? $fs : render_fs;
 
 module spider_section(ir=6,or=13, l=6, lt=1, h, die=false) {
+	//a = 360/l;
 	a = 360/l;
-	cx=or-ir+.2;
-	for (r=[0,a]) 
-		rotate([0,0,r]) 
-			translate([ir+cx/2-.2,0,0]) cube([cx, die ? lt+.2 : lt, h], center=true);
+	cx=or-ir;
 	if (die) {
-		RiS(R=or, r=0, h=h, w1=0, w2=60);
-		Ri(R=ir+.4, r=0, h=h);
+		RiS(R=or+.01, r=0, h=h+.01, w1=0, w2=60);
+		Ri(R=ir+.2, r=0, h=h+.01);
+                spider_section(ir=ir,or=or,l=l,lt=lt+.2,h=h+.01,die=false);
 	} else {
+		for (r= [0,a])
+		    rotate([0,0,r]) 
+			translate([ir+lt/2,0,0])
+                            cube([or-ir+lt, lt, h], center=true);
 		Ri(R=ir, r=ir-lt, h=h);
 	}
 }
@@ -21,35 +31,41 @@ module spider(ir=6, sd=9, or=13, l=6, lt=1, h=3, die=false) {
 	difference() {
 		union() {
 			for (i=[0 : 1 : l-1])
-				if (i % 2) rotate([0,0,i*360/l]) spider_section(ir=ir,h=h,die=die);
+				if (i % 2) rotate([0,0,i*360/l]) spider_section(ir=ir,or=or,h=h,die=die);
 		}
 	}
 }
 
-module lovejoy(ph=5, jh=3) {
-	ir = ($children < 1) ? 4.2 : 0; 
-	difference() {
+module lovejoy(
+    ph=5, // Plate Height
+    r=13, // Diameter
+    jh=3, // Jaw Height
+    align = true,
+    bc=undef, // base color
+    cc=undef // cut color
+) {
+	//ir = ($children < 1) ? 4.2 : 0; 
+        dz = align ? -ph : 0;
+	translate([0,0,dz]) difference() {
                 // Body
-		translate([0,0,-(jh+ph)/2]) Ri(R=13-.1,r=ir,h=ph+jh);
+                assert($children<3, "Lovejoy only supports up to 2 children.");
+                union() {
+                    // Base Plate.
+                    color(bc)
+                        cylinder(r=r, h=ph+jh); //Ri(R=d,r=ir,h=ph+jh);
+                    // Child 0 adds to base
+                    if ($children > 0) children(0);
+                }
                 // Cuts
-		translate([0,0,-jh/2+.01]) spider(ir=6, die=true, h=jh+.1);
+		translate([0,0,ph+jh/2])
+                    color(cc) spider(ir=2, or=r, die=true, h=jh);
                 // Center Cuts
-		if ($children > 0)
-			children();
+		if ($children > 1) translate([0,0,-.01]) children(1);
 	}
 }
 
-if (! $preview) {
-	$fs= .1;
-	$fn= 60;
-}
 color("pink")
-	lovejoy() translate([0,0,-6]) cylinder(r=2, h=12, $fn=4, center=true);
-color("green") 
-	translate([0,0,0]) spider(ir=6, die=false, h=3);
-color("blue")
-	rotate([180,0,0]) {
-		lovejoy();
-}
-
-//translate([tan(60),0,-2]) color("yellow") cube([.1,1,5]);
+    lovejoy(r=4, ph=5, jh=3, align=false) {
+                union();
+                cylinder(h=8,d=4);
+    }