Initial import from Thingieverse

Lian Li Connectors by srepmub from 2014.

Scad is broken, but this is the original.

files/pc.scad

@@ -0,0 +1,154 @@
+PC_THICK=1.5;
+PC_W=14.5;
+PC_D=9.5;
+
+PLAY=0.1;
+
+PLUG_H=13;
+PLUG_R=2;
+PLUG_THICK=1.5;
+
+BAR_W=4;
+BAR_H=1;
+
+OVAL_W=5.5;
+OVAL_H=9;
+OVAL_D=6;
+OVAL_CHOP=0.8;
+HOLE_R=1;
+
+FOOT_W=13;
+FOOT_H=3;
+FOOT_D=11;
+FOOT_SHIFT=2.5;
+
+LEG_W=3.5;
+LEG_H=20;
+LEG_HOLE_W=1.5;
+
+PLUG_PIN_DELTA=15;
+
+WING_W=FOOT_W-FOOT_SHIFT;
+WING_D=2;
+
+CLIP_W=7;
+
+module plug_body(r,d) {
+    translate([0,0,-d/2])
+    minkowski() {
+        cube([PC_W-r, PLUG_H-r, PC_D+d]);
+        cylinder(r=r, h=0.01, $fn=20);
+    }
+
+}
+
+module plug_edge() {
+    translate([-PC_W/2,-PC_W+PC_THICK+PC_H,0])
+    difference() {
+        plug_body(PLUG_R,0);
+        translate([-PLUG_THICK,-PLUG_THICK,0])
+            plug_body(PLUG_R-1,1);
+        translate([0,-100,-50])
+            cube([100,100,100]);
+    }
+}
+
+module plug_side() {
+    translate([0,BAR_H,-PC_D/2])
+    difference() {
+        union() {
+            plug_edge();
+            bar();
+            clip1();
+            oval_edge();
+        }
+        translate([-100,-50,-50])
+            cube([100,100,100]);
+    }
+}
+
+module bar() {
+    translate([PC_W/2-PLUG_THICK,-1,0])
+        cube([BAR_W,BAR_H,PC_D]);
+}
+
+module clip1() {
+    translate([PC_W/2,PC_THICK,0])
+    linear_extrude(height=PC_D)
+    polygon(points=[[0,0],[1.5,0],[1.5,2],[0,4]]);
+}
+
+module oval_shape(d,d2) {
+    translate([0,0,-d2/2])
+    scale([1,(OVAL_H+2*d)/(OVAL_W+2*d),1])
+        cylinder(r=(OVAL_W+2*d)/2,h=PC_D+d2,$fn=20);
+}
+
+module oval() {
+    translate([0,0,-OVAL_D/2])
+    translate([0,-OVAL_H/2+PLUG_H,0])
+    difference() {
+        intersection() {
+            oval_shape(0,0);
+            cube([OVAL_W,OVAL_H-2*OVAL_CHOP,2*OVAL_D], center=true);
+        }
+        cylinder(r=HOLE_R,h=OVAL_D,$fn=10);
+    }
+}
+
+module oval_edge() {
+    translate([0,-OVAL_H/2+PLUG_H-PLUG_THICK,0]) {
+        intersection() {
+            difference() {
+                oval_shape(PLUG_THICK,0);
+                oval_shape(PLAY,0.1);
+            }
+            translate([-50,0,0])
+            cube([100,100,100]);
+        }
+    }
+    translate([OVAL_W/2+PLUG_THICK,PLUG_H-PLUG_THICK-OVAL_H+1,0]) {
+        intersection() {
+            cylinder(r=2.6, h=PC_D,$fn=20);
+            translate([-100,-50,0])
+                cube([100,100,100]);
+        }
+        translate([-PLUG_THICK,0,0])
+            cube([PLUG_THICK,4.5,PC_D]);
+    }
+}
+
+module plug() {
+    plug_side();
+    translate([0.01,0,0])
+    mirror([1,0,0])
+        plug_side();
+}
+
+module pin() {
+    translate([-FOOT_W/2-FOOT_SHIFT/2,0,-FOOT_D/2])
+        cube([FOOT_W,FOOT_H,FOOT_D]);
+    
+    translate([0,PLUG_PIN_DELTA,0])
+        oval();
+    
+    difference() {
+        translate([0,LEG_H/2,0])
+            cube([LEG_W,LEG_H,OVAL_D],center=true);
+        translate([0,LEG_H/2,0])
+            cube([LEG_HOLE_W,LEG_H,OVAL_D],center=true);
+    }
+
+    translate([0,0,-WING_D/2])
+        linear_extrude(height=WING_D)
+        polygon(points=[[-WING_W/2,FOOT_H],[WING_W/2,FOOT_H],[LEG_W/2,LEG_H],[-LEG_W/2,LEG_H]]);
+
+    translate([FOOT_W/2-FOOT_SHIFT/2,0,-WING_D/2])
+    linear_extrude(height=WING_D)
+    polygon(points=[[0,FOOT_H/2],[0,FOOT_H],[CLIP_W,FOOT_H],[CLIP_W,FOOT_H/2],[CLIP_W-FOOT_H,0],[CLIP_W-FOOT_H,FOOT_H/2]]);
+}
+
+translate([0,PLUG_PIN_DELTA*2,0])
+plug();
+pin();
+