diff --git a/GearHinge.scad b/GearHinge.scad
index 2f7da56..9d8b061 100644
--- a/GearHinge.scad
+++ b/GearHinge.scad
@@ -42,7 +42,7 @@ SideW=tol+BackW;
 
 echo("Reference Diameter (MeshD): ", MeshD);
 //rot=90*$t;
-rot=1;
+rot=3;
 
 //meshed(rot=rot);
 
@@ -50,9 +50,16 @@ $fa = ($preview) ? 17 : .1;
 $fs = ($preview) ?  3 : .1;
 $incolor = true;
 
-gear_hinge(rot=rot, box=false, rounded_case=true);
+plate_hinge();
+//gear_hinge(rot=rot, box=false, rounded_case=true);
 //translate([50,0,0]) gear_hinge(rot=rot, box=false, box_top=true);
 
+module plate_hinge() {
+	rot = 90 - 5;
+	gear_hinge(rot=rot, box=false, rounded_case=true);
+	
+}
+
 module gear_hinge(
 	box=true,
 	rounded_case=false,
@@ -82,8 +89,7 @@ module gear_hinge(
 
 module gear_track_block() {
 		difference() {
-			//CyS(r=MeshD/2 + Module/2, h=width/2, w1=245, w2=250);
-			CyS(r=MeshD/2, h=width, w1=275, w2=310);
+			CyS(r=MeshD/2 +.5, h=width, w1=275, w2=310);
 			CyS(r=ShaftD+.5, h=width, w1=275, w2=310);
 		}	
 }
@@ -93,14 +99,14 @@ module gear_track_block() {
 //         currently only used on the blue_gear. 
 //         xxx: red_gear maybe should be refactored to use it?
 module gear_sector(meshd, width) {
-	CyS(r=meshd, h=width, w1=215, w2=00);
-	CyS(r=meshd/2 - 2, h=width, w1=-1, w2=90);
+	CyS(r=meshd, h=width, w1=215, w2=15);
+	CyS(r=meshd/2 - 1.6, h=width, w1=-1, w2=90);
 }
 
 // blue_gear - Gear on the left with the track block built into its back side.
 module blue_gear() {
 		intersection() {
-			spur_gear(n=N1, w=width, m=Module, chamfer=30, helix_angle = helix_angle, add=-tol/2 );
+			spur_gear(n=N1, w=width, m=Module, chamfer=30, helix_angle = helix_angle, add=-tol/4 );
 				difference() {	
 					gear_sector(meshd=MeshD, width=width);
 			
@@ -129,15 +135,16 @@ module red_gear()
 		union() {
 		CyS(r=MeshD/2 - 2, h=width, w1=90, w2=190);
 		intersection() {
-			spur_gear(n=N2, w=width, m=Module, chamfer=30, helix_angle=-helix_angle, add=-tol/2);
-			CyS(r=MeshD, h=width, w1=180, w2=-30);
+			spur_gear(n=N2, w=width, m=Module, chamfer=30, helix_angle=-helix_angle, add=-tol/4);
+			CyS(r=MeshD, h=width, w1=181, w2=-30);
 
 
 		}
 		
 		// leaf arm
-		translate([-2,11.6,0]) leaf_arm(left=false, h=width+3.2);
-				// Rear Block
+		translate([-2,11.6,0]) leaf_arm(left=false, h=width+3.2) 
+			translate([0,-4+tol,0]) cube([4,10,width+3.2], center=true);
+		// Rear Block
 		gear_track_block();
 	}
 	// Shaft Hole
@@ -151,8 +158,8 @@ module red_gear()
 
 }
 
-module leaf_arm(left=true, h, angle=false) {
-	dx = 7.51;
+module leaf_arm(left=true, h, l, angle=false) {
+	dx = 3;
 	difference() {
 			//cube([4,20,width+1], center=true);
 			translate([0,-9.5+dx/2,0]) cube([4,dx,width], center=true);
@@ -168,7 +175,11 @@ module leaf_arm(left=true, h, angle=false) {
 				}
 			}
 		}
-		translate([0,-4+tol,0]) cube([4,10,h], center=true);
+		if ($children < 1) {
+			translate([0,-6+tol,0]) cube([4,4,h], center=true);
+		} else {
+			children(0);
+		}
 }
 
 module round_case_inner(meshd, shaftd, width, tol) {