diff --git a/box.scad b/box.scad
index 2853a21..0eb27d0 100644
--- a/box.scad
+++ b/box.scad
@@ -10,7 +10,7 @@ include <fdmouse.scad>
 
 /* [Part] */
 
-PART = ""; // [ all_corners, corner_top_rear, corner_top_front_l, corner_top_front_r, corner_bottom, edge_back_bottom_a, edge_back_bottom_b, edge_back_bottom_c, edge_back_bottom_d, edge_front_bottom, edge_side_top, edge_side_foot_left, edge_side_foot_right, edge_top_front, edge_top_back, edge_test, full_box, joiner_top, joiner_bottom, joiner_slop, profile, side_edge, rbfoot, hinge, new_joiner, rear_mount, grid_mount ]
+PART = ""; // [ all_corners, corner_top_rear, corner_top_front_l, corner_top_front_r, corner_bottom, edge_back_bottom_a, edge_back_bottom_b, edge_back_bottom_c, edge_back_bottom_d, edge_front_bottom, edge_side_top, edge_side_front, edge_side_foot_left, edge_side_foot_right, edge_top_front, edge_top_back, edge_test, full_box, joiner_top, joiner_bottom, joiner_slop, profile, side_edge, rbfoot, hinge, new_joiner, rear_mount, grid_mount, handle ]
 
 /* [Profile Dimensions] */
 
@@ -144,12 +144,13 @@ module hinge_mount(bz=WIN_THICK, inv=false, bl=10) {
 	}
 }
 
-module hinge(theta=90, show=true) {
+module hinge(theta=90, mx=1.8, my=5, mz=20, show=true) {
 	x=7;
 	py=20;
 	d = .4 / sqrt(2);
 	difference() {
 		left(x/2)cuboid([x,20+2*d,50], fillet=2, edges=EDGES_X_ALL);
+		zspread(n=2, l=(-1+py+mz/2)) back(5)left(x-.4-mx/2) cuboid([mx, my, mz+2]);
 		hinge_mount($die=true);
 	}
 	left(5+d)back(py/2 + 5+2*d)zrot(theta){
@@ -158,12 +159,13 @@ module hinge(theta=90, show=true) {
 			right(5.3)fwd(9/4)cuboid([x,2*d+1+9/2,6], align=V_LEFT, chamfer=1, edges=EDGES_Y_RT+EDGE_BK_RT);
 		}
 		cyl(r=2, h=42);
-		zspread(n=3, l=25 ) difference() {
+		zspread(n=3, l=25 ) {difference() {
 			union() {
 				cyl(d=9, h=6, chamfer=.8);
 				right(5+d)back(9/4)cuboid([x,2+9/2,6], align=V_LEFT, chamfer=1, edges=EDGES_Y_RT+EDGE_FR_RT);
 			}
 			cyl(r=2.2, h=6.2);
+			}
 		}
 		difference() {
 			left((x)/2-(5+d))back(15+5)cuboid([x,30+2*d,50], fillet=2, edges=EDGES_X_ALL);
@@ -171,6 +173,7 @@ module hinge(theta=90, show=true) {
 				hinge_mount(bl=9, $die=true);
 				if (show) %hinge_mount(bl=9,$die=false);
 			}
+			zspread(n=2, l=(-1+py+mz/2)) back(10)right(.4-mx/2) cuboid([mx, my, mz+2]);
 		}
 	}
 }
@@ -196,6 +199,20 @@ module rearMount(md=141.333, theta=90, show=true) {
 	}
 }
 
+module handle(d=15, l=110) {
+	w=1.2;
+	up((d+10)/2) {
+		cyl(d=d, h=l+1, orient=ORIENT_X);
+		xspread(n=2, l=l) difference() {
+			hull() {
+				cyl(d=d+10, h=8, orient=ORIENT_X, fillet=1);
+				down((d+10-6)/2)fwd(10)cyl(d=6, h=8, orient=ORIENT_X, fillet=1);
+			}
+			down((d+10)/2)xrot(180)m3s_clear(bl=12, bz=-12);
+		}
+	}
+}
+
 module box_edge(ps=PROFILE_SIZE, l=10, orient=ORIENT_Z, jh = JOINER_H,jw = JOINER_W, slop=JOINER_SLOP, jb=5, jup = false, jdown=false, flx=false, ft=FLOOR_THICK, wl=WIN_LIP, ioff=0, wx=true, wt=WIN_THICK, wtr = WIN_TRIM, hm=false, hc=false, ht=0, hs=false, tubepass=false, tn = 2, ix=true, iy=true, rbfoot=false, rbleft=false, cm=false, gm=false, my=false, align=V_CENTER) {
 	jzoff = l/2-jw/2;
 	inner_off = ps/2 + wt;
@@ -439,6 +456,15 @@ if (PART == "edge_side_top") {
 	}
 	up((wt+wl)/sqrt(2))yrot(45)box_edge(l=ly, rbfoot=false, flx=false, wx=true, jup=true, jdown=true, cm=false, orient=ORIENT_Y);
 }
+if (PART == "edge_side_front") {
+	if (Print_Ears) {
+		left(coff/2-2*psoff)  back(ly/2)zrot(315)ear(thick=.2, dis=-2);
+		right(coff/2-2*psoff) back(ly/2)zrot(225)ear(thick=.2, dis=-2);
+		left(coff/2-2*psoff)  fwd(ly/2)zrot(45)ear(thick=.2, dis=-2);
+		right(coff/2-2*psoff) fwd(ly/2)zrot(135)ear(thick=.2, dis=-2);
+	}
+	up((wt+wl)/sqrt(2))yrot(45)box_edge(l=ly, rbfoot=false, flx=false, wx=true, iy=false, my=true, jup=true, jdown=true, cm=false, orient=ORIENT_Y);
+}
 if (PART == "edge_top_front") {
 	//r = $t *90 - 45;
 	r=-45;
@@ -531,13 +557,18 @@ if (PART == "edge_test")
 
 if (PART == "hinge") {
 	r = $t *90;
-	hinge(theta=r);
+	// r = 135; // max
+	yrot(90)hinge(theta=r);
 }
 
 if (PART == "rear_mount") {
 	up(7) yrot(-90) rearMount();
 }
 
+if (PART == "handle") {
+	handle();
+}
+
 if (PART == "new_joiner") {
 	new_joiner();
 	//#new_joiner_clear();