drybox-ng/README.md

Drybox-NG an Unoriginal Drybox Implemented in OpenSCAD

Openscad Code by sjc (Stephen Carpenter)


# Background

I really liked some of the Drybox options I found, especially the
[Unoriginal Prusa Drybox](https://www.printables.com/model/551828-unoriginal-prusa-drybox)
but I stock different sized heat set inserts and I don't use normal CAD.
So I set about to rebuild it in OpenSCAD; my way.

Version 1.0 fell off its mount. 
V2.0 has feet that hook onto the mount, Magnets for hinged lid and
doors, and a buffer mount for the rear.
Version 3.0 goes together without glue so parts are replacable.

Silica cup mounts have inserts spaced to mount a 1x3 Gridfinity base.
Cup and base generated from gridfinity_extended. (see Other Sources)

# Building

Insert models use my 
[Inserts Library](https://sancus.carpanet.net/sjc/inserts)

Box parts rely on [BOSL](https://github.com/revarbat/BOSL)

Modify parameters as you like, the default will give a pretty decent
aproximation of the original that it is based on which will mount on 
similar stands. Change dimensions and you are on your own. Not all
parameters have been well tested. Good Luck.

Parts snap together solidly, shove a small piece of filament in the
tiny holes in between them. 

## TODO
- Cleanup
- Need lid magnet

Lid has features that block access to magnets. Also, handle too large.
Need to bridge gap!

## Done
- Hinge cut for door fit
- Removed inserts behind door
- Removed window/floor inserts from corners
- inset offset to edge
- Need Mount for Buffer
- Door Handle
- ALL THE MAGNETS!


V1:
Bottom Y + Feet 13hr 160g (29g support)
Top Corners 13hr 126g
Top Corners 13hr 126g
Back Bottom Edge (pcm) 12h 136 g

# Other Sources

Magnet.svg by [Solar Icons](https://www.figma.com/community/file/1166831539721848736?ref=svgrepo.com) in CC Attribution License

Silica Cup and Gridfinity base generated from
[gridfinity_extended](https://github.com/ostat/gridfinity_extended_openscad)