diff --git a/bracket.scad b/bracket.scad
index 340a2bb..2659dd3 100644
--- a/bracket.scad
+++ b/bracket.scad
@@ -18,7 +18,7 @@ LegOff = 19;
 LegGap=4;
 
 /* [Render Options] */
-part=""; // [both, back, head_corner_rear, head_corner_front, foot_cross_front, foot_cross_rear, head_cross_front, head_cross_rear ]
+part=""; // [both, back, head_corner_rear, head_corner_front, foot_corner_front, foot_corner_rear, head_cross_front, foot_cross_front, foot_cross_rear ]
 model = "none"; // ["none", "corner_leg", "center_leg"]
 plate = false;
 mate  = false;
@@ -81,6 +81,41 @@ module head_front() {
 	}
 }
 
+module foot_front() {
+	blockz= footcrossyz + 2*10;  // 95;
+	difference() {
+		right(19/2-4)cuboid([platfoot_x+16+LegOff,platfoot_y+footboard_y,blockz], fillet=3, edges=EDGES_FRONT+EDGES_Y_ALL, align=V_FRONT+V_TOP);
+		back(.01)platfoot();
+		// Screw Holes
+		rx= 5 + headpost_x/2;
+		bz = -40;
+		bl = 58 - bz;
+		up(blockz/2)zspread(n=3, l=blockz-10)
+			right(rx+LegOff) rotate([-90,0,0]) rotate([0,0,180]) m4s_clear(bl=bl, bz=bz, drop=true, sh=0);
+		up(blockz/2)left(30) zspread(n=2, l=blockz-10) rotate([-90,0,0]) rotate([0,0,180]) m4s_clear(bl=bl, bz=bz, drop=true, sh=0);
+	}
+}
+
+module foot_rear() {
+	z = footcrossyz + 2*10;
+	difference() {
+		union() {
+			left(19/2+4)back(footboard_y) cuboid([platfoot_x+16+19,headpost_y+footboard_y, z], fillet=3, edges=EDGES_BACK+EDGES_Y_ALL, align=V_FRONT+V_TOP);
+			fwd(10)up(z/2)right(40-4)rotate([90,0,-45])rotate_extrude(angle=360) left(18) circle(d=10);
+		}
+		footboard();
+		headpost(y=2*headpost_y);
+		left(44)up(z/2)cuboid([50, 150, footcrossyz]); // crossbar
+		// Screw Holes
+		rx = 5 + headpost_x/2;
+		right(rx)up(z-5) screw_channel();
+		right(rx)up(z/2) screw_channel();
+		right(rx)up(5) screw_channel();
+		left(50)up(z-5) screw_channel();
+		left(50)up(5) screw_channel();
+	}
+}
+
 module head_cross_rear() {
 	difference() {
 		cuboid([platmid_x+20, 25+10, 42], fillet=3,align=V_BACK);
@@ -152,6 +187,15 @@ if (part == "head_cross_front") {
 	rot = plate ? -90 : 0;
 	xrot(rot)
 	head_rear();
+} else if (part == "foot_corner_front") {
+	rot = plate ? -90 : 0;
+	xrot(rot)
+	foot_front();
+} else if (part == "foot_corner_rear") {
+	rot = plate ? -90 : 0;
+	xrot(rot)
+	foot_rear();
+	if (mate) { fwd(headpost_x) left(19) %foot_front(); }
 } else if (part == "both") {
 	fwd(platfoot_y+LegGap+13) left(LegOff)head_front();
 	head_rear();