diff --git a/bracket.scad b/bracket.scad
index 85e474a..8b05a86 100644
--- a/bracket.scad
+++ b/bracket.scad
@@ -47,8 +47,6 @@ module headpost(x=headpost_x, y=headpost_y, z=260, align=V_FRONT) {
 }
 
 module screw_channel() {
-	//back(19.2)cyl(d=6, h=10, orient=ORIENT_Y,align=V_FRONT);
-	//back(9)cyl(d=3.5, h=100, orient=ORIENT_Y, align=V_FRONT);
 	fwd(80)rotate([-90,180,0])m4s_clear(bl=100, drop=false);
 }
 
@@ -56,7 +54,7 @@ module head_rear() {
 	blockz=headcross_yz+2*10;
 	difference() {
 		union() {
-			left(19/2+4)back(footboard_y) cuboid([
+			left(LegOff/2+4)back(footboard_y) cuboid([
 				platfoot_x+16+LegOff,
 				headpost_y+footboard_y,
 				blockz], fillet=3, edges=EDGES_BACK+EDGES_Y_ALL, align=V_FRONT+V_TOP);
@@ -79,26 +77,28 @@ module head_rear() {
 module head_front() {
 	blockz=headcross_yz + 2*10;
 	difference() {
-		right(19/2-4)cuboid([
+		right(LegOff/2-4)cuboid([
 			platfoot_x+16+LegOff,
 			platfoot_y+footboard_y,
-			blockz ], fillet=3, edges=EDGES_FRONT+EDGES_Y_ALL, align=V_FRONT+V_TOP);
-		back(.01)platfoot();
-		// Screw Holes
+			blockz ], fillet=3, 
+			edges=EDGES_FRONT+EDGES_Y_ALL, align=V_FRONT+V_TOP);
+		back(.01) platfoot();
+		// Screw HolesXTFei 14 Inch Heavy Duty Platform Bed Frame
 		rx= platfoot_y + (16+LegOff)/2;
 		bz = -40;
 		bl = 58 - bz;
-		up(blockz/2)zspread(n=3, l=blockz-10)
-		right(rx) rotate([-90,0,0]) rotate([0,0,180]) m4s_clear(bl=bl, bz=bz, drop=true, sh=0);
-		left(31)up(blockz-5) rotate([-90,0,0]) rotate([0,0,180]) m4s_clear(bl=bl, bz=bz, drop=true, sh=0);
-		left(31)up(5) rotate([-90,0,0]) rotate([0,0,180]) m4s_clear(bl=bl, bz=bz, drop=true, sh=0);
+		up(blockz/2) {
+			zspread(n=3, l=blockz-10) right(rx) rotate([-90,180,0]) m4s_clear(bl=bl, bz=bz, drop=true, sh=0);
+			zspread(n=2, l=blockz-10) left(50-LegOff) rotate([-90,180,0]) m4s_clear(bl=bl, bz=bz, drop=true, sh=0);
+		}
+		
 	}
 }
 
 module corner_gasket(yd=cornergasket) {
 	blockz=headcross_yz+2*10;
 	difference() {
-		left(19/2+4) cuboid([
+		left(LegOff/2+4) cuboid([
 			platfoot_x+16+LegOff,
 			5,
 			blockz], fillet=2
@@ -112,7 +112,7 @@ module corner_gasket(yd=cornergasket) {
 module foot_front() {
 	blockz= footcrossyz + 2*10;  // 95;
 	difference() {
-		right(19/2-4)cuboid([platfoot_x+16+LegOff,platfoot_y+footboard_y,blockz], fillet=3, edges=EDGES_FRONT+EDGES_Y_ALL, align=V_FRONT+V_TOP);
+		right(LegOff/2-4)cuboid([platfoot_x+16+LegOff,platfoot_y+footboard_y,blockz], fillet=3, edges=EDGES_FRONT+EDGES_Y_ALL, align=V_FRONT+V_TOP);
 		back(.01)platfoot();
 		// Screw Holes
 		rx= 5 + headpost_x/2;
@@ -128,7 +128,7 @@ module foot_rear() {
 	z = footcrossyz + 2*10;
 	difference() {
 		union() {
-			left(19/2+4)back(footboard_y) cuboid([platfoot_x+16+19,headpost_y+footboard_y, z], fillet=3, edges=EDGES_BACK+EDGES_Y_ALL, align=V_FRONT+V_TOP);
+			left(LegOff/2+4)back(footboard_y) cuboid([platfoot_x+16+LegOff,headpost_y+footboard_y, z], fillet=3, edges=EDGES_BACK+EDGES_Y_ALL, align=V_FRONT+V_TOP);
 			fwd(10)up(z/2)right(40-4)rotate([90,0,-45])rotate_extrude(angle=360) left(18) circle(d=10);
 		}
 		footboard();
@@ -225,17 +225,17 @@ if (part == "head_cross_front") {
 		if (mate) { %head_cross_front(); }
 	}
 } else if (part == "head_corner_front") {
-	tx = (plate) ? 0 : -19;
+	tx = (plate) ? 0 : -LegOff;
 	ty = (plate) ? 0 : -headpost_y-4;
 	translate([tx, ty, 0])
 	head_front();
-	if (mate) right(19)back(38)%head_rear();
+	if (mate) right(LegOff)back(38)%head_rear();
 } else if (part == "head_corner_rear") {
 	rot = plate ? -90 : 0;
 	upoff = plate ? footboard_y : 0;
 	up(upoff) xrot(rot) {
 		head_rear();
-		if (mate) fwd(38) left(19)%head_front();
+		if (mate) fwd(38) left(LegOff)%head_front();
 	}
 } else if (part == "foot_corner_front") {
 	rot = plate ? 0 : 0;
@@ -246,7 +246,7 @@ if (part == "head_cross_front") {
 	zt = plate ? footboard_y : 0;
 	up(zt) xrot(rot) {
 		foot_rear();
-		if (mate) { fwd(headpost_x) left(19) %foot_front(); }
+		if (mate) { fwd(headpost_x) left(LegOff) %foot_front(); }
 	}
 } else if (part == "both") {
 	fwd(platfoot_y+LegGap+13) left(LegOff)head_front();
@@ -260,7 +260,7 @@ if (part == "head_cross_front") {
 	rot = plate ? 90 : 0;
 	xrot(rot) {
 		corner_gasket();
-		if (mate) { down(blockz/2)fwd(headpost_x) left(19) %head_front(); }
+		if (mate) { down(blockz/2)fwd(headpost_x) left(LegOff) %head_front(); }
 	}
 }
 
@@ -272,15 +272,4 @@ if (model == "corner_leg") {
 	%head_cross_bar();
 	%head_plat_mid();
 }
-//left(19)fwd(headpost_y+4)
-//head_front();
-//head_rear();
-
-
-
-//left(19)fwd(headpost_y+4)head_front();
-//back(2) rotate([-90,0,0])
-//back(20)head_rear();
-//%platfoot();
-//%cuboid([150, 25,25], align=V_BACK); // crossbar